2013 Chrysler 300 Air Filter in Millbury, MA

The 2013 Chrysler 300’s engine air filter sits inside the air cleaner box in the engine bay on the passenger side, ahead of the 3.6L V6 intake tube.

Open the hood and look to the passenger-side front corner: the plastic air box houses the panel-style filter that feeds the V-shaped intake for the 292-hp Pentastar engine. A tight seal here is critical for accurate MAF readings and proper fuel trims, especially on New England roads. Our Millbury service team can inspect the housing and clips during replacement.

• Passenger-side air cleaner housing next to intake snorkel
• Panel filter accessed by releasing housing clips/screws
• Seating the lid evenly prevents unmetered air leaks

The 2013 Chrysler 300 cabin air filter is located behind the glove box within the HVAC intake area.

Lower or remove the glove box to access the rectangular cabin filter door, then slide the old filter out and note airflow direction. This area traps pollen and road dust common around Worcester County, so correct orientation matters for filtration and blower performance. If trim removal isn’t your thing, our Millbury team can handle it quickly.

• Behind glove box; access panel on HVAC housing
• Airflow arrows must face the correct direction
• Good time to inspect for leaves/debris in cowl

The engine air filter protects the 3.6L V6s intake from dirt, while the cabin air filter cleans the HVAC air that you and your passengers breathe.

The engine filter lives in the under-hood air box feeding the throttle body; a clean element supports power, fuel economy, and sensor accuracy. The cabin filter sits behind the glove box and traps pollen, dust, and odors circulating through the vents. Both are essential for New England driving comfort and reliability.

• Engine filter = combustion air; cabin filter = passenger air
• Different locations, sizes, and media types
• Both should be replaced with OEM-spec Mopar filters

Common signs include reduced engine power, lower fuel economy, rough idle (engine filter) and weak HVAC airflow or musty odors (cabin filter).

When the under-hood filter loads up, the 292-hp V6 may feel sluggish and the transmission may hunt more as the engine struggles to breathe. In the cabin, dust, haze on the windshield, or a strained blower in spring pollen season can point to a saturated filter. Our Millbury shop can confirm with a quick visual inspection.

• Engine: hesitation, poor MPG, intake noise changes
• Cabin: reduced vent flow, odors, increased window fog
• Visible debris or darkened pleats on removed filters

The engine filter is typically DIY-friendly, while the cabin filter often requires glove box removal and is easier at the dealer.

Most owners can unclip the air box and swap the engine filter carefully, ensuring the lid seals to prevent unmetered air. The cabin filter sits behind trim and can be awkward; our certified technicians include an intake/MAF visual check and proper seating of the HVAC filter. If you prefer expert service, schedule service online.

• DIY engine filter: basic tools, careful resealing
• Cabin filter: tight access, correct airflow orientation
• Dealer includes housing check and disposal

Yeswe install genuine Mopar OEM-spec filters for the 2013 Chrysler 300.

Our factory-certified team uses Mopar components designed for the 3.6L V6 intake and the 300s HVAC system to ensure proper fit, filtration efficiency, and sensor compatibility. Genuine parts support performance in Central Massachusetts driving and align with manufacturer standards. Check our current service specials before you book.

• Mopar engine and cabin filters matched to OE spec
• Proper seal to protect MAF and throttle body
• Backed by a factory-authorized service center

Tell-tale signs include weak vent airflow, persistent odors, and increased dust on interior surfaces.

Behind the glove box, the filter traps Worcester-area pollen and road grit; once saturated, it restricts blower performance and can leave a musty smell. If your defroster struggles or the fan seems loud but airflow is low, the cabin filter may be due. We can confirm in Millbury with a simple pull-and-inspect.

• Check for gray/black pleats and debris buildup
• Monitor airflow changes between fan speeds
• Seasonal pollen spikes may accelerate loading

Visit Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury at 2 Latti Farm Road, Millbury, MA 01527 for 2013 Chrysler 300 air filter service.

Were minutes from Worcester, Auburn, and Grafton with easy Route 20 access. Our team services both engine and cabin filters on the Chrysler 300 using Mopar parts and factory procedures. Book a time that works for you and review offers online.

• Central MA location serving Worcester County
• Schedule appointment in seconds
• See service specials before you visit

The 2013 Chrysler 300 pairs a 3.6L V6 (Pentastar) with an under-hood panel engine air filter housed in a sealed air cleaner box on the passenger side. A rectangular cabin air filter sits behind the glove box within the HVAC intake to trap pollen, dust, and road debris common to Central Massachusetts driving. Genuine Mopar filters are engineered for proper fit and media density, helping maintain 292 hp, stable fuel trims, and quieter HVAC operation. If you encounter reduced power, rough idle, weaker vent airflow, or musty odors, a visual inspection can confirm loading or debris. We install Mopar OEM-spec elements and verify housing seals to prevent unmetered air and blower noise. Bring your 2013 Chrysler 300 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury for OEM-spec filter service schedule service.

Our air filter service for the 2013 Chrysler 300 focuses on accuracy, fit, and system health. First, we perform a visual inspection of the engine air intake, then replace the engine filter with a Mopar OEM-spec element and re-seat the housing to ensure an airtight seal. Next, we inspect and, if needed, replace the cabin air filter behind the glove box, confirming correct airflow direction and secure latching of the access door. Technicians also check the intake tract for debris and perform a visual MAF/throttle body check to spot contamination early. We finish with proper disposal of old filters and a brief performance/airflow check. Prefer to plan ahead? Use our online portal to schedule service, and review current service specials before you visit.

Based in Millbury, we proudly serve Worcester County communities including Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford with factory-authorized filter care for the 2013 Chrysler 300. Local driving brings seasonal pollen, leaf litter, winter sand, and salt dust that load filters faster, so periodic inspections help preserve V6 performance and HVAC airflow. Our team installs Mopar engine and cabin filters and verifies intake housing seals to protect sensors and maintain smooth drivability on Route 20 commutes and I-290 trips. Were easy to find at 2 Latti Farm Road with convenient online booking and transparent service steps. Have questions or need directions? Start with a quick schedule service request and check our service specials for potential savings before you arrive.