2020 Dodge Charger Air Filter
Dodge Air Filter service at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury, MA Frequently Asked QuestionsFrequently Asked Questions
11 common questions answered
Where is the engine air filter located on a 2020 Dodge Charger?
The 2020 Dodge Charger’s engine air filter sits in a rectangular air box inside the engine bay.
Open the hood and locate the sealed intake air box; on most Chargers with the 3.6L V6, it’s mounted near the front corner of the bay with clips or screws holding the lid. Access is straightforward with basic hand tools. If you’d like us to inspect or replace it, you can schedule service at our Millbury facility for OEM-spec results.
- Rectangular air box with serviceable lid
- Typically secured by clips or Torx/Phillips screws
- Positioned along the intake snorkel in the engine bay
Where is the cabin air filter on a 2020 Dodge Charger?
The 2020 Dodge Charger’s cabin air filter is located behind the glove box in the HVAC intake area.
To access it, lower or remove the glove box to reveal the cabin filter door on the HVAC housing. This position lets the filter scrub incoming air for dust, pollen, and road debris. If you prefer professional service near Worcester County, our team in Millbury uses genuine Mopar filters for a precise fit and lasting performance.
- Behind-glove-box access on the passenger side
- Slides into a dedicated HVAC filter slot
- No special tools typically required, but trim clips may need care
What’s the difference between an engine air filter and a cabin air filter on a 2020 Dodge Charger?
The engine air filter protects the 3.6L V6 intake, while the cabin air filter cleans HVAC air for passengers.
Under the hood, the engine filter feeds clean air to the V6 for proper combustion and performance; inside the dash, the cabin filter targets dust, pollen, and odors for comfort. Both matter—engine filters affect power and efficiency, while cabin filters affect in-car air quality. Our Millbury service center installs Mopar-spec filters designed for your Charger.
- Engine filter: intake protection, performance impact
- Cabin filter: HVAC/pollen control, comfort impact
- Mopar OEM filter media matched to Dodge specifications
What are the signs of a clogged air filter on a 2020 Dodge Charger?
Common signs include reduced power, lower fuel economy, and rough idle for the engine filter; weak airflow and musty odors for the cabin filter.
If your 2020 Dodge Charger hesitates under acceleration or the HVAC feels weak or smells stale, your filters may be loaded with debris. New England pollen, road salt dust, and construction grit can speed up clogging. Book a quick inspection in Millbury—use our schedule service tool for a convenient appointment.
- Engine: sluggish response, poor MPG, uneven idle
- Cabin: reduced vent airflow, persistent odor, hazy windows
- Visual: dark, debris-filled pleats on the filter media
Can I replace the air filter on my 2020 Dodge Charger myself, or should the dealer do it?
Yes—engine filters are generally DIY-friendly, while the cabin filter sits behind the glove box and may require careful trim handling.
Many Charger owners swap the engine filter with basic tools; the cabin filter involves glove-box removal and correct orientation of the new element. Dealer service adds an intake housing check, a visual MAF inspection, and Mopar-spec parts. Prefer professional help in Central Massachusetts? Schedule an appointment in Millbury.
- DIY engine filter: simple tools, follow box seal alignment
- Cabin filter: mind airflow arrow and latch tabs
- Dealer adds intake/MAF checks and OEM-spec media
Does Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury use OEM filters for 2020 Dodge Charger replacements?
Yes, we install genuine Mopar OEM filters for Dodge vehicles, including the 2020 Dodge Charger.
Our factory-certified, OEM-trained technicians use Mopar parts to match Dodge filtration specs for the 3.6L V6 and the Charger’s HVAC system. OEM filters help maintain fit, sealing, and performance. You can also check current service specials and schedule service online at our Millbury location.
- Mopar-branded engine and cabin filters
- Engineered to Dodge flow and efficiency targets
- Installed by certified technicians in Millbury, MA
How do I schedule 2020 Dodge Charger air filter service in Millbury, MA?
Use our online scheduler at /service/index.htm to book a 2020 Dodge Charger air filter appointment in Millbury.
Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury makes it easy to reserve a time that fits your day. You can also review service specials before booking. We’re at 2 Latti Farm Road, Millbury, MA 01527—convenient to Worcester, Auburn, and nearby towns.
- Fast online scheduling
- Local, factory-authorized Mopar service
- Easy access off Route 20 in Millbury
Do you inspect the mass airflow sensor during a 2020 Dodge Charger air filter change at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury?
Yes, our air filter service includes a visual MAF sensor and intake housing check.
Beyond replacing the engine or cabin element, our technicians look for loose clamps, damaged ducts, and debris that can skew readings on the 3.6L V6 intake. This quick step helps protect drivability and fuel economy. Prefer a professional once-over? Schedule service with our Mopar-trained team in Millbury.
- Visual MAF inspection for contamination
- Air box seal and duct integrity check
- OEM-spec filter installation and seating
What’s Included in a 2020 Dodge Charger Air Filter Replacement
Our process focuses on factory detail and clear communication. For the engine intake, we inspect the air box, verify seal condition, check clamps and ducts, perform a visual MAF sensor check, and install a Mopar-spec element with correct orientation. For the cabin, we lower or remove the glove box as needed, inspect the HVAC filter slot and door, and fit a Mopar cabin filter with the airflow arrow aligned. We complete a final seal and airflow verification before road-testing as needed. Ready to book? Schedule service online—appointments are available throughout the week.
2020 Dodge Charger Air Filter Specifications
The 2020 Dodge Charger with the 3.6L V6 relies on two filters: an under-hood engine air filter that feeds the intake system, and a cabin air filter that conditions HVAC air for passengers. We install genuine Mopar OEM components to match Dodge’s fit, filtration efficiency, and airflow requirements. If your driving includes dusty construction routes, heavy pollen seasons, or frequent idling, periodic inspections help prevent performance and comfort issues. Bring your 2020 Dodge Charger to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury for OEM-spec filter service — schedule service.
2020 Dodge Charger Air Filter Service in Millbury
Serving Worcester County and surrounding communities—including Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford—our Millbury location provides factory-authorized air filter service for the 2020 Dodge Charger. New England driving can load filters with road salt dust, spring pollen, and leaf debris, so periodic checks keep the 3.6L V6 breathing well and your cabin air clean. Our onsite Service Center is staffed by factory-certified, OEM-trained technicians who use genuine Mopar parts for dependable results. Find us at 2 Latti Farm Road (off Route 20) in Millbury, MA 01527, or schedule your appointment online today.