2016 Ram 1500 Oil Change

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury provides up-front, itemized pricing for 2016 Ram 1500 oil changes, with OEM-spec oil and filter included.

Exact totals vary by oil type (conventional, blend, or full synthetic) and any coupons you apply from our service specials. Your 2016 Ram 1500’s 3.6L V6 benefits from oil that meets Chrysler MS-6395, which we stock along with Mopar filters. You’ll see the full estimate before work begins and can approve right from your phone.

• Transparent estimate with parts, labor, and disposal clearly listed
• Apply current service specials to lower your total
• OEM-spec oil and Mopar filter help protect engine longevity

Most 2016 Ram 1500 oil change appointments are completed in about 60 minutes, including a multi-point inspection.

Plan on roughly an hour from check-in to final paperwork, depending on shop volume and any additional approved services (like a tire rotation). Booking ahead helps us stage parts and minimize your wait. You can schedule service online and opt into text updates for real-time status in Millbury.

• Typical in-bay time ~30–45 minutes; allow extra for inspection and write-up
• Combine with tire rotation to save a future visit
• Text/email updates available when you schedule online

Follow the oil life monitor and the owner’s manual guidance for your 2016 Ram 1500, and change sooner under severe New England conditions.

Frequent short trips, idling, towing, or cold-weather starts around Worcester accelerate oil degradation. Many owners align service with the vehicle’s oil life system and seasonality—sooner if the truck tows or plows. We can review your usage and recommend an interval that fits your driving in Central Massachusetts.

• Severe duty includes towing, plowing, stop‑and‑go, and sub-freezing starts
• Oil life monitor provides a data-based reminder
• Ask for interval guidance tailored to your duty cycle

The 3.6L V6 in the 2016 Ram 1500 specifies oil meeting Chrysler MS-6395, typically 5W-20 full synthetic for best cold-start protection.

We stock Mopar- and OEM-approved oils that meet MS-6395 to maintain viscosity stability during Massachusetts winters. Using the specified grade helps protect timing components and ensures proper VVT operation. If your truck sees heavy towing, we can discuss oil selections that balance protection and fuel economy.

• MS-6395 approved oil meets FCA requirements
• 5W-20 viscosity supports cold-start pumpability
• Mopar filter used to maintain filtration efficiency

The 2016 Ram 1500 with the 3.6L V6 typically requires about 6.0 quarts of engine oil with filter.

Capacity can vary slightly by engine and configuration, so we verify your VIN and use Mopar service data at check-in. Filling to spec and confirming the level after a hot recheck prevents overfill and aeration issues. We also reset your oil life monitor before returning the truck.

• Approximate capacity: 6.0 quarts with filter for 3.6L V6
• VIN-verified spec checked in Mopar databases
• Oil life monitor reset after service

Yes if you want OEM-spec oil/filter, a multi-point inspection, and service records tied to your 2016 Ram 1500’s VIN.

Quick-lube shops can be convenient, but our Millbury service team installs oil that meets MS-6395 and a Mopar-quality filter, then documents everything for maintenance history. That helps with warranty compliance and resale transparency. You’ll also get a technician inspection and factory torque specs on drain plug and filter.

• OEM-spec oil and Mopar filter help protect engine systems
• VIN-linked records support warranty and resale
• Inspection and proper torque applied by certified techs

Skipping or extending oil changes beyond the owner’s manual guidance can jeopardize warranty coverage if a related failure occurs.

Warranty claims typically require proof of proper maintenance intervals and the correct oil specification. Keeping receipts and service records tied to your VIN helps demonstrate compliance. Our advisors can review your maintenance history and set reminders so you stay on track.

• Maintain intervals per owner’s manual and oil life monitor
• Use oil meeting MS-6395 and keep receipts/records
• Certified service provides documentation if warranty work is needed

Full synthetic that meets MS-6395 offers the best cold-start protection and oxidation resistance for a 2016 Ram 1500 in Massachusetts winters.

Conventional oil can shear and oxidize faster under severe duty, while blends improve stability. Full synthetic maintains viscosity in sub-freezing starts and under towing heat, supporting timing and VVT performance. We’ll recommend an oil that matches your duty cycle and season.

• Conventional: acceptable for light duty/short intervals
• Blend: better stability and protection than conventional
• Full synthetic: strongest low-temp flow and high-temp stability

Your appointment begins with a written estimate and VIN verification for the 2016 Ram 1500, confirming the 3.6L engine specs and required MS-6395 oil. We drain the old oil, replace the crush washer as applicable, install a Mopar-quality filter, and fill to the verified capacity. A factory-trained technician performs a multi-point inspection, checks and tops off fluids, inspects belts and hoses, and sets tire pressures to spec. We then start the engine, check for leaks, perform a hot recheck for level accuracy, and reset the oil life monitor. Any findings are documented with photos or videos for your approval. View current service specials and schedule service online.

For the 2016 Ram 1500 with the 3.6L V6, use engine oil that meets Chrysler MS-6395, commonly a 5W-20 full synthetic for reliable cold-start pumpability and stable high-temp protection. Typical capacity is about 6.0 quarts with a new filter; we verify by VIN and confirm on a hot recheck to prevent overfill. Follow the owner’s manual and the truck’s oil life monitor; shorten intervals for severe duty like winter cold starts, towing, plowing, and stop‑and‑go traffic. Using a Mopar or equivalent OEM-quality filter maintains filtration efficiency and anti‑drainback performance. Bring your 2016 Ram 1500 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury for an OEM-spec oil change — schedule service.

We serve Worcester County and nearby communities—Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford—from our convenient location at 2 Latti Farm Road (off Route 20), Millbury, MA 01527. New England’s climate brings sub-freezing mornings and summer heat, both of which stress engine oil. Full synthetic meeting MS-6395 flows faster at cold start to reduce wear, and resists oxidation under towing or job-site idling. If you plow, tow, or commute in stop‑and‑go traffic, we can tailor intervals to your duty cycle and season. Use our online tool to schedule an appointment, and check service specials before you arrive. For directions or questions, visit our website or stop in—we’re easy to reach from Worcester via Route 20.