2010 Jeep Liberty Air Filter in Millbury, MA

The 2010 Jeep Liberty’s engine air filter sits inside the under-hood airbox connected to the intake tube.

You’ll find the airbox in the engine bay; release the clips or screws on the cover, lift it, and the rectangular filter lifts straight out. Keeping this filter clean helps the 3.7L V6 breathe properly and maintain throttle response. If you prefer professional service, our Millbury team can replace it and inspect the air intake tract the same day.

• Located in the engine bay inside the plastic airbox
• Cover typically secured by clips or screws for easy access
• Mopar OEM filters sized to fit the 3.7L V6 intake

Many 2010 Jeep Liberty models were not equipped with a factory cabin air filter; location and availability vary by VIN.

Some Liberties have a serviceable HVAC filter access behind the glove box, while others require an accessory kit to add a filter. If you’re unsure, we can check your VIN at our Millbury dealership and confirm whether your vehicle supports a cabin filter and install Mopar components if applicable.

• VIN check confirms factory cabin filter provision
• Typical access point (if equipped): behind glove box
• Mopar kits available for compatible HVAC housings

The engine air filter protects the 3.7L V6’s intake, while the optional cabin filter (if equipped) cleans air entering the HVAC for passengers.

The engine filter prevents dirt from reaching the throttle body and mass airflow path, preserving power and fuel economy. A cabin filter, when fitted, reduces dust, pollen, and debris entering the Liberty’s interior through the ventilation system. Both improve comfort and longevity, but they serve different systems.

• Engine filter: under-hood airbox, protects combustion air
• Cabin filter: HVAC intake, improves in-cabin air quality
• Both benefit from periodic inspection and timely replacement

Common signs include reduced power, lower fuel economy, rough idle, weak HVAC airflow, and musty odors.

On the 3.7L V6, a dirty engine filter can limit airflow and dull acceleration. Inside the cabin (if equipped), a clogged HVAC filter restricts blower output and can contribute to odors. Our Millbury service team can inspect both filters, the intake housing, and nearby seals to pinpoint the cause quickly.

• Sluggish throttle response or hesitation
• More frequent fill-ups with no change in driving
• HVAC fan feels weak or smells musty (cabin filter)

The engine air filter is typically DIY-friendly, while verifying cabin filter fitment and installing Mopar-spec parts is best handled by a dealer.

Many Liberty owners can open the airbox and swap the engine filter with basic hand tools. Cabin filter availability varies by VIN, and some HVAC housings require parts verification or modification. At our Millbury location, we also inspect the intake path and seals and confirm correct filter orientation.

• DIY: engine filter swap via airbox cover
• Dealer: VIN check for cabin filter compatibility
• Bonus checks: intake housing, seals, and MAF area

Yes—our technicians install Mopar OEM-spec filters for the 2010 Jeep Liberty.

Using Mopar parts ensures proper fit and filtration for the 3.7L V6 and the HVAC system (if equipped with a cabin filter). We pair installation with a visual intake and housing check, disposal of old parts, and a road-ready quality review at our Millbury, MA facility.

• Mopar OEM-spec engine and cabin filters
• Correct fit for Jeep Liberty 3.7L V6 intake
• Installed by brand-certified technicians

Book online anytime using our schedule service tool at /service/index.htm.

Choose a time that fits your day and note any engine or HVAC symptoms in the comments. Our team at 2 Latti Farm Road, Millbury, MA 01527 will confirm the appointment, pre-pull Mopar parts for your Liberty, and have you in and out efficiently.

• Schedule online: schedule service
• Easy access off Route 20 in Millbury
• VIN-based parts verification before your visit

Yes—current offers are posted on our service specials page at /promotions/service/index.htm.

Check back frequently to see if an engine or cabin air filter promotion is available for your 2010 Jeep Liberty. You can apply eligible offers when you book online and present them at our Millbury Service Center.

• View deals: service specials
• Offers updated by the Millbury service team
• Combine online scheduling with applicable promotions

The 2010 Jeep Liberty uses a 3.7L V6 (210 hp/235 lb-ft) and requires a Mopar OEM-spec rectangular engine air filter sized for its intake box.

This V6 (engine code reference: V-type 3.7L) benefits from a high-quality filter to maintain airflow at typical 2,000–3,000 rpm cruising and 4,000+ rpm acceleration. Our Millbury parts counter can match your VIN to the correct Mopar filter and have it installed during the same visit.

• 3.7L V6: regular unleaded, naturally aspirated
• Mopar OEM-spec rectangular filter for Liberty KK
• VIN match ensures exact fitment

Driving around Worcester County means four-season roads, construction zones, and periodic pollen bursts that can load an air filter faster than expected. Our Millbury Service Center helps 2010 Jeep Liberty owners stay proactive with quick inspections and Mopar-spec replacements. We serve nearby communities—including Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford—with straightforward appointments and parts matched to your VIN. During each visit, a brand-certified technician verifies the condition of the engine filter and, if applicable, confirms whether your Liberty supports a cabin filter and installs one when desired. You can plan your visit, explore service offers, and arrive off Route 20 with confidence. For directions or to lock in a time, use our online tools to schedule and we’ll prepare your parts ahead of arrival.

Need a convenient slot this week? Secure your time with our online scheduler: schedule service. Looking to save on maintenance? Review our current service specials before you check in. Our facility at 2 Latti Farm Road, Millbury, MA 01527 is easy to reach and ready to help keep your Liberty performing well year-round.

For a 2010 Jeep Liberty, our air filter service focuses on precision fit and a clean intake path. A technician begins by examining the under-hood airbox, removing the used engine filter, and checking the housing for dust trails or debris that indicate bypass. The new Mopar OEM-spec filter is installed with the correct orientation and seal. If your Liberty is equipped for a cabin filter, we confirm HVAC housing compatibility by VIN, access the compartment (commonly behind the glove box on compatible vehicles), and install a Mopar cabin filter when requested. We also perform a visual lookover of the intake snorkel and mass airflow sensor area and dispose of old filters responsibly.

What you get: engine filter inspection and replacement, housing cleanliness check, correct seating/orientation, and an HVAC filter check/install if your VIN supports it. Want to plan your visit around your day? Use our online booking tool to schedule service, and check for current offers on our service specials page before you arrive.

The 2010 Jeep Liberty’s 3.7L V6 relies on a properly sized Mopar OEM-spec rectangular engine air filter to maintain smooth airflow to the intake. Many Liberty models were not factory-equipped with a cabin air filter; availability depends on the HVAC housing tied to your VIN. When present, the cabin filter typically fits in an access slot behind the glove box to capture dust and pollen before air reaches the vents. Because real-world driving conditions in Central Massachusetts can load filters faster, we recommend periodic inspections during routine service so you replace only when needed. If you notice reduced power, increased fuel use, weak HVAC airflow, or a musty smell, it’s time to inspect.

Our advisors can verify part numbers by VIN and install Mopar filters that meet Jeep’s OEM specifications. Bring your 2010 Jeep Liberty to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury for OEM-spec filter service — schedule service.