2016 Dodge Charger Air Filter in Millbury, MA

It sits inside the engine bay air box on the passenger side, ahead of the intake tube.

The 2016 Dodge Charger’s V8 intake draws through a sealed air box designed to keep debris out of the 6.4L engine. Pop the hood, locate the box near the front corner, and you’ll see clips or screws securing the cover. Our Millbury team can inspect and replace it using genuine Mopar media for proper airflow and sealing in Massachusetts driving conditions.

• Access via air box cover fasteners in the engine bay
• Filter slides into a sealed housing for tight fit
• Mopar-spec element maintains intake flow to the 485-hp V8

It’s typically behind the glove box, mounted in the HVAC intake slot.

On the 2016 Dodge Charger, cabin filter access usually requires lowering or detaching the glove box and removing a small access door. This position lets the filter capture pollen, dust, and road particles before they enter the vents. Visit Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury for quick replacement and proper reassembly.

• Glove box lowered to reach the HVAC access panel
• Slide-out tray holds the rectangular cabin filter
• Ensures clean airflow through your Charger’s vents

The engine filter cleans air for combustion, while the cabin filter cleans air for passengers.

In your 2016 Dodge Charger, the engine filter protects the 6.4L V8 by trapping dirt before it reaches the intake. The cabin filter, placed in the HVAC path, captures pollen and fine dust before air enters the cabin. Both matter for performance and comfort—our Millbury service team installs Mopar-spec filters for each job.

• Engine filter = intake protection and proper airflow
• Cabin filter = cleaner, fresher in-cabin air
• Different media types and locations for distinct roles

Common signs include reduced power or mpg for the engine filter and weak airflow or musty odors for the cabin filter.

On a 2016 Dodge Charger, a restricted engine filter can dull throttle response and fuel efficiency for the 6.4L V8. A dirty cabin filter often causes stale smells and diminished HVAC flow. In Central Massachusetts, seasonal pollen and road grit can accelerate loading; we can inspect both quickly in Millbury.

• Engine: sluggish acceleration, rougher idle, lower mpg
• Cabin: reduced vent output, foggy windows, odors
• Visual check: dark, debris-filled filter media

The engine filter is typically DIY-friendly; the cabin filter often needs glove box access and trim handling.

Many owners can swap the 2016 Dodge Charger’s engine filter with basic tools. The cabin filter requires careful glove box removal and proper seating of the access door to prevent air leaks. Our Millbury Service Center adds OEM-spec Mopar parts, intake/MAF checks, and proper disposal.

• DIY: engine filter via air box cover fasteners
• Dealer: cabin filter access, correct fit, quiet reassembly
• Added value: intake seal check and MAF visual inspection

Yes—our technicians install genuine Mopar engine and cabin air filters on the 2016 Dodge Charger.

Using Mopar parts helps maintain proper fit, airflow, and filtration for your Charger’s 6.4L V8 and HVAC system. Our factory-certified team follows OEM procedures and verifies sealing surfaces to prevent unmetered air and cabin bypass. Visit us in Millbury for model-correct components and installation.

• Genuine Mopar elements sized for the 2016 Charger
• OEM fit reduces intake leaks and cabin dust
• Installed by OEM-trained technicians

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury at 2 Latti Farm Road, Millbury, MA 01527, performs Charger air filter service.

We’re your Central Massachusetts service destination for OEM-spec engine and cabin filter replacements on the 2016 Dodge Charger. Our facility is just off Route 20, convenient to Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford. Book online and ask about current offers.

• Factory-authorized Mopar parts and procedures
• Easy access from Route 20 with ample parking
• Online schedule service and service specials

Open the glove box, release its side stops, lower it fully, then remove the HVAC access door to slide the filter out.

This access path is typical for the 2016 Dodge Charger and helps ensure debris is caught before it reaches the vents. Take care not to deform the new filter when inserting it, and confirm the airflow arrow points correctly. Our Millbury technicians can handle this quickly if you prefer professional service.

• Release glove box tabs to drop the compartment
• Remove the small cabin filter door and tray
• Install with airflow arrow oriented correctly

The 2016 Dodge Charger uses two filtration elements: an engine air filter for the 6.4L V8 intake and a cabin air filter for HVAC airflow. Genuine Mopar filters are engineered to match the Charger’s air box geometry and climate control system, preserving throttle response and clean cabin air. Follow your owner’s manual for service intervals and adjust based on driving conditions; New England pollen bursts and dusty summer construction can shorten effective life. During each service, our team verifies proper sealing surfaces and inspects the intake tract for debris. Bring your 2016 Dodge Charger to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury in Millbury for OEM-spec filter service — schedule service.

Our process for the 2016 Dodge Charger is thorough and model-aware. We begin with a visual condition check of the engine air filter and its housing, looking for tears, gaps, and debris. Next, we replace the engine filter with a Mopar-spec element and confirm the cover seals uniformly. We then inspect and replace the cabin air filter behind the glove box, verify airflow direction, and reassemble trim without rattles. A visual MAF and intake snorkel check help catch early issues. Disposal of used elements is handled responsibly. Ready to book? Schedule service today.

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Millbury serves Central Massachusetts drivers in Worcester, Auburn, Grafton, Shrewsbury, Sutton, and Oxford with OEM-focused air filter care for the 2016 Dodge Charger. Local road salt, spring pollen, and dusty summer construction can load filters faster than the manual’s baseline, so periodic inspections are smart. Our factory-certified, OEM-trained technicians perform accurate fitment and sealing checks to protect your Charger’s 6.4L intake and cabin HVAC. We’re located at 2 Latti Farm Road, just off Route 20, with convenient online booking and current offers. Have questions or need directions? Use our schedule appointment tool or view service specials.